A cutter head with HW reversible knives and spurs for making of precise grooves ( 8-10-12mm) with- and cross the grain direction. The tool body is of structural steel or aluminum.

For making of grooves with the grain direction, in wood and various panel materials. Tool body in structural steel, HW/HS-tipped cutting edges.

Cutter head with HW reversible knives and spurs for making of precise grooves ( from 4 up to 19.5 mm), groove width adjustable with spacers. Operates with- and cross the grain direction. Tool body in structural steel or aluminum.

An additional cutter for extending the range of the adjustable grooving cutter head (catalogue number 113-30).

Adjustable set of 2 cutters for longitudinal and cross grooving with different width. Tool body in structural steel, HW/HS-tipped cutting edges.

Cutter head with HW reversible knives and spurs for rebating and grooving in solid woods and panel materials. Design - alternate axial angel ± 5 °. The shear angel allows a better chip discharge and a longer cutting edge life, as well as supreme quality of the processed surface. Tool body in steel or aluminum.

An HW/HS-tipped cutter for rebating and grooving of solid wood and panel materials. There are 3 options of blade design: the knife has an axial cutting angle of 0°, or a unilateral axial angle of 5°, or an alternate axial angle of ± 5°. When ordering, you can specify the desired design option. The tool body is made of structural steel.

A cutter head with reversible HW knives and spurs for rebating and grooving of solid woods and panel materials. Design - axial cutting angle 0° (straight cut). The tool body is of structural steel or aluminum.

A cutter head with HW reversible knives, which allows angle adjustment in bevel profiling (chamfering) at a different angle. The tool body is made of structural steel.

A multi-functional rebate cutter head with exchangeable and reversible HM inserts. For profiling of solid wood workpieces /chamfering, rounding, as well as cutting a groove for rubber insulation/. The tool body is made of structural steel or aluminum.

A circular saw with adjustable width of cutting. The adjustment is made through a system of a scaled ring and spacers, mounted on a body. With every different position of the system towards the tool rotations axis, a different cutting width is achieved. A TCT – circular saw can be used for processing of hard wood or a monolith SP – circular saw for processing of soft wood.