Steel cutter head in a set with HS /SP profile knives and limitors. For profiling of up to 100 different profiles on soft wood. A tool set in a wooden box includes: 1 cutter head with a mounted pair of rebating knives (profile “0”) and limitors, and 6-12-24 (or freely chosen number) pairs of profile knives and limitors. MAN manual feed.

See 113-6x-xx about choice of profile knives.

Steel cutter head in a set with HS /SP profile knives. For profiling of up to 100 different profiles on soft wood. A tool set in a wooden box includes: 1 cutter head with a mounted pair of rebating knives (profile “0”), and 6-12-24 (or freely chosen number) pairs of profile knives. MEC mechanical feed.

See 113-6x-xx about choice of profile knives.

Steel/Aluminum cutter head in a set with HS /SP profile knives. For profiling of up to 100 different profiles on soft wood. Tool set in a wooden box includes: 1 cutter head with a mounted pair of rebating knives (profile “0”), and 6-12-24 (or freely chosen number) pairs of profile knives. MEC mechanical feed.

See 113-6x-xx about choice of profile knives.

Cutter head with reversible HW/HS knives for profiling of frames, borders, sills and other decorative elements in soft and hard wood. Tool body – structural steel or aluminum.

For cutting of all kinds of profiled borders, sills and decorative elements in solid wood. Profile design – at customers’ choice or in accordance with the schemes below. An HW/HS-tipped cutter with a body of structural steel.

A cutting tool with a corpus of structural steel, with mechanically mounted tungsten carbide inserts. It is used for bevel profiling (chamfering) of soft and solid wood, panel materials and MDF.

An HW/HS-tipped cutter with a body of structural steel. It is used for bevel profiling (chamfering) of solid wood and panel materials.

The diagram is valid for HW/HS cutters
with bore d=30mm only.

For bore d=40mm: D+10 mm
For bore d=50mm: D+20 mm

Example: Chamfering angle (bevel) 45°,
cutting edge width 30mm, bore 40mm

A cutting tool with a body of structural steel with mechanically mounted tungsten carbide inserts. It is used for round profiling of soft and solid wood, panel materials and MDF.

For cutting of precise convex radius profiles in soft and hard wood, and arch-like wooden workpieces with a mould. Tool body in structural steel, HW/HS-tipped.

For cutting of precise concave radius profiles in soft and hard wood, and arch-like wooden workpieces with a mould. Tool body in structural steel, HW/HS-tipped.

Tool for cutting of convex radius profiles - half round in soft and hard wood. By longitudinal processing, two identical tools working together - one opposite the other, it is possible to make round wooden pieces. Tool body in structural steel, HW/HS-tipped.

A tool for cutting of concave radius profiles – half round in soft and hard wood. An HW/HS-tipped cutter with a body of structural steel.

Cutter head set of three heads with reversible HW plates. The outside profiled cutters allow chamfering at 45° or rounding at R=2-3-4-5-6 mm on the both sides of the workpiece. The center cutter joints (rebates) the straight part of the wooden workpiece, axial design – shear cutting angel 0° or one-side shear angel + 5°. Please, define the design type of the central cutter, when ordering.

Cutter set consisting of three cutters. The outside profiled cutters allow chamfering at 45 ° or rounding at R=2-3-4-5-6 mm on the both sides of the workpiece. The center cutter joints (rebates) the straight part of the wooden workpiece, axial design - shear cutting angel 0 ° or one-side shear angel + 5 °. When ordering, please, define the design type of the central cutter. Tool body in structural steel, HW/HS-tipped.